Skip to content

TEMP-1 Magnetic Mount

The TEMP-1 comes with an optional magnetic mount which can be used to secure the TEMP-1 to your fridge or grill as shown below.

Correct TEMP-1 mounting on the grill side shelf versus incorrect mounting on the hot grill lid

1. To use your magnetic mount place it with the magnet facing upwards as shown:

Empty TEMP-1 magnetic mount frame lying with the magnet facing up

2. Align the lid with the hole in the top right and place your TEMP-1 inside the magnetic mount and gently press down.

TEMP-1 seated in the magnetic mount, seen from above with the magnet strip visible

Front view of the TEMP-1 seated in the magnetic mount above the magnet strip

3. It will sit flush as shown in the image below.

Side view of the TEMP-1 sitting flush in the magnetic mount

4. Affix your TEMP-1 to the outside of fridge or a safe cool place on the grill.

TEMP-1 in its magnetic mount attached to the outside of a black fridge

TEMP-1 magnetic mount on the grill side shelf with the probe cable running into the lid

Do not leave your sensor outside or let it get wet!

The TEMP-1 should not be left outside for long periods of time or allowed to get wet. You will need to use another case around your TEMP-1 if there will be high moisture content in the air or if it is expected to rain.