Skip to content

MLED-1 introduction

The Apollo MLED-1, a small green circuit board with an ESP32 module, resting in the palm of a hand

The Apollo MLED-1 is a mini LED controller for addressable LED strips. It runs Apollo's build of WLED, so you get WLED's effects, palettes, and presets from the moment it's on your Wi-Fi, and Home Assistant picks it up through the WLED integration.

Small enough to hide: The MLED-1 fits in the palm of your hand, with one WAGO output for your LED strip. Tuck it behind a TV, under a shelf, or inside a project box.

WLED, set up for the MLED-1: The firmware already knows which pin drives your strip and names its own setup hotspot, Apollo MLED-1 Hotspot. Pick your strip's type and length, and you're lighting it up.

Control it your way: Use the WLED web page in any browser, the WLED app for iPhone and Android, or Home Assistant. It all runs with local control: your home runs on your own network, and your devices keep working even if your internet goes down or Apollo goes away.

Wi-Fi setup over USB: Flash the firmware and put the MLED-1 on your Wi-Fi in one go from the Apollo installer in your browser. No hotspot needed.

The Apollo MLED-1 in the palm of a hand, showing its WAGO LED output connector and USB-C port

Product details

Spec Detail
Rating 5V, 3A
LED output One WAGO connector for an addressable LED strip, with data on GPIO 13
Microcontroller ESP32-PICO-MINI-02 with 8MB flash
Connectivity Wi-Fi
Setup Improv over USB serial from the Apollo installer, plus the open Apollo MLED-1 Hotspot at 4.3.2.1
Home Assistant WLED integration
Firmware Apollo's build of WLED 16.0.1, open source under the EUPL-1.2. Source on GitHub.

Ask Apollo for help, not the WLED project

The MLED-1's firmware is a modified version of WLED and isn't an official WLED release. If something isn't working, reach out to us on Discord and we'll help you sort it out.

Get started with your MLED-1 Join our Discord if you need more help!