Update or reflash the MLED-1¶
The Apollo installer puts the latest MLED-1 firmware on your device over USB. Use it to update to a new release and keep your settings, or to start fresh if your MLED-1 isn't behaving.
Before you start
You need a computer with Chrome or Edge, and a USB cable that carries data, not only power.
WLED's update button can't fetch MLED-1 builds yet
WLED's own update button can't fetch Apollo's MLED-1 builds yet. The Apollo installer always has the latest one.
1. Plug the MLED-1 into your computer with a USB data cable.
2. Open the Apollo installer for the MLED-1 and click Connect & Install.
3. Pick the MLED-1's serial port in the browser popup and click Connect.
4. Click Install Apollo MLED-1.
5. When the installer asks whether to erase the device, choose what you want to keep:
- Leave Erase device unticked to keep your Wi-Fi, LED settings, and presets.
- Tick Erase device to wipe everything and start fresh.
6. Click Next, then Install, and keep the page visible until you see Installation complete!.
If you kept your settings, the MLED-1 rejoins your Wi-Fi and Home Assistant on its own. If you erased it, set it up again from getting started.
Want the firmware files?
Each release on GitHub carries MLED-1_full_install.bin, a full image you flash at offset 0x0, and an update file for WLED's manual upload.
Still stuck? Reach out on Discord or at support@apolloautomation.com so we can help.