Skip to content

TEMP-1B magnetic mount

The TEMP-1B comes with an optional magnetic mount which can be used to secure the TEMP-1B to your fridge or grill as shown below.

Correct TEMP-1B mount on a cool grill side shelf next to a crossed-out mount on the hot grill lid

1. To use your magnetic mount place it with the magnet facing upwards as shown:

Empty TEMP-1B magnetic mount lying flat with the magnet facing up

2. Align the lid with the hole in the top right and place your TEMP-1B inside the magnetic mount and gently press down.

Top view of the TEMP-1B seated in the magnetic mount with the lid hole in the top right

TEMP-1B seated in the magnetic mount, seen from the 3.5mm port side

3. It will sit flush as shown in the image below.

TEMP-1B standing on end with the magnetic mount sitting flush against the case

4. Affix your TEMP-1B to the outside of a fridge or a safe cool place on the grill.

TEMP-1B in its magnetic mount attached to the outside of a fridge

TEMP-1B in its magnetic mount on a grill side shelf with the food probe cable running into the grill

Do not leave your sensor outside or let it get wet!

The TEMP-1B should not be left outside for long periods of time or allowed to get wet. You will need to use another case around your TEMP-1B if there will be high moisture content in the air or if it is expected to rain.