Skip to content

Reset Wi-Fi credentials on your PLT-1B

You'll reset the device's Wi-Fi credentials, then connect it to your new Wi-Fi network through its hotspot.

1. Plug the device into power.

2. Long press the Boot button for 10 seconds

Open PLT-1B case with tweezers pointing at the boot button (SW1) next to the USB-C port

Closed PLT-1B case with tweezers inserted into the boot button opening on the side

3. The Wi-Fi credentials should be reset and it will broadcast its hotspot again.

4. Connect to the hotspot titled "Apollo PLT1B Hotspot" and enter your new Wi-Fi details!