Skip to content

TEMP-1 Magnetic Mount

The TEMP-1 comes with an optional magnetic mount which can be used to secure the TEMP-1 to your fridge or grill as shown below.

Correct sensor mounting on the grill side shelf beside an incorrect mounting on the hot grill lid

1. To use your magnetic mount place it with the magnet facing upwards as shown:

Empty magnetic mount frame lying flat with the magnet facing up

2. Align the lid with the hole in the top right and place your TEMP-1 inside the magnetic mount and gently press down.

TEMP-1 seated in the magnetic mount, viewed from above

TEMP-1 in the magnetic mount, viewed from the side with the probe port and magnet strip

3. It will sit flush as shown in the image below.

TEMP-1 sitting flush in the magnetic mount, viewed from the end

4. Affix your TEMP-1 to the outside of a fridge or a safe cool place on the grill.

TEMP-1 in the magnetic mount attached to the outside of a fridge door

TEMP-1 in the magnetic mount on a grill side shelf with the probe cable running under the lid

Do not leave your sensor outside or let it get wet!

The TEMP-1 should not be left outside for long periods of time or allowed to get wet. You will need to use another case around your TEMP-1 if there will be high moisture content in the air or if it is expected to rain.