General

This will walk you through the process of connecting your new Apollo Multisensor (MSR-1) to Hom...

Apple iPhone/iWatch Alternative HACS Integration: iPhone Detect https://community.home-assistan...

ESPHome Integration 1. Go to settings and select Devices & services  2. Select ESPHome 3. ...

    1. Navigate to the ESPHome addon    2. Select the Edit button under the desired device    ...

1. Navigate to the ESPHome addon    2. Select the Edit button under the desired device    3. I...

The ESP chips produce a significant amount of energy constantly using wifi. Here is how to adju...

Updating Through ESPHome Addon In HomeAssistant open the ESPHome addon Or click this to Open ...

1. Take your sensor outside (for a walk :D) and plug it in. Make sure it is connected to Home Ass...

Try a couple of different power cord and power brick combinations - this matters a lot more tha...

If your device becomes unresponsive and you've exhausted the other troubleshooting methods you ca...

This will cover how to remove an Apollo device from Home Assistant Navigate to Home Assist...

This will cover how to put the MSR-1 into boot mode. This is sometimes needed for uploading new f...

Changing your wifi connection to fast connect can have stability problems Setup your device us...

If mDNS is unchecked then Home Assistant and ESPHome will not auto discover new devices. Also, if...

This tutorial will guide you through setting up one of our MSR-2 devices (works with any mezzan...