MSR-2

    Please refer to the general getting started article

Once added to Home Assistant you can configure different settings for your sensor. Below is what ...

Please refer to the general Bluetooth tracking article

MSR-2 Light Sensor (LTR-390UV) When mounting the MSR-2 be sure to position the device so th...

How To Change The Update Frequency Of Sensors

Please refer to the general firmware update article

If you're experiencing false triggers, we recommend using Radar Engineering Mode (REM) to monitor...

Auto-Calibration (Average, Maximum, and Intelligent)1. Download the HLKRadarTool app for either A...

DPS310 & SCD40 Sensors: Overcoming Temperature & Humidity Reading Challenges The DPS310 and SCD4...

Please refer to the General CO2 Calibration article

Radar Scatter Plot With Apex Charts For MSR-2 type: custom:apexcharts-card header: show: t...

This guide will walk you through using the buzzer on your MSR-2. You can also call the below se...

This tutorial will guide you through setting up one of our MSR-2 devices (works with any mezzan...

MSR-2 Examples from GitHub

My grandmother wanted a security system that would alert her when there was movement in her home ...

Column1 Apollo MSR-1 Apollo MSR-2 Everything Presence One Kit Everything Presence Lit...

This is for the MSR-1 but it is very similar to the MSR-2.1. Unplug your MSR-2 from power and rem...

Open your Home Assistant configuration.yaml Add this code to the very bottom but use the entit...

If your device becomes unresponsive and you've exhausted the other troubleshooting methods you ca...

This will cover how to put the MSR-2 into boot mode. This is sometimes needed for uploading new f...

Apollo MSR-2 Review: The Smallest Presence Sensor Ever Made