AIR-1

    Please refer to the general getting started article

Once added to Home Assistant you can configure different settings for your sensor. Below is what ...

Please refer to the general Bluetooth tracking article

1. Unplug your AIR-1 from power and remove the back 2. At the bottom center there is a black c...

1. Unplug your AIR-1 from power and follow the video

How To Change The Update Frequency Of Sensors

Please refer to the general firmware update article

Please refer to the general CO2 calibration article

The AIR-1 uses the SEN55 for its temperature reading. Calibrating it to your environment is very ...

CO2 Charts Home Assistant Sensor graph: line type: sensor entity: sensor.apollo_air_1_a79e3...

This tutorial will guide you through setting up one of our MSR-2 devices (works with any mezzan...

Firstof9 has created this beautiful responsive dashboard with Apexcharts-card custom card from HA...

If your device becomes unresponsive and you've exhausted the other troubleshooting methods you ca...

This will cover how to put the AIR-1 into boot mode. This is sometimes needed for uploading new f...

Plug the device into power Long press the Boot button for 10 seconds The Wi-Fi credentials sh...

Air Quality Sensor Comparison

Smart Home Scene AIR-1 Review