Search Results

MSR-2 Examples from GitHub

My grandmother wanted a security system that would alert her when there was movement in her home after she had gone to bed. So, I set up three of our Apollo Automation mmWave sensors. These devices, plus the Alarmo add-on, quickly and easily allowed me to inst...

Column1 Apollo MSR-1 Apollo MSR-2 Everything Presence One Kit Everything Presence Lite Kit Screek Human Sensor 1U Screek Human Sensor 2A Aqara FP1 Aqara FP2 Apollo MTR-1 Price (USD) $ 34.99 $ 34.99 $ 78.00 $ 37.00 $ 25.99 $ 29.99 $...

This is for the MSR-1 but it is very similar to the MSR-2.1. Unplug your MSR-2 from power and remove the back 2. Remove the board from the case and orientate it like the below image. In the bottom right there is a black connector. There is an x in the lower...

Open your Home Assistant configuration.yaml Add this code to the very bottom but use the entity name of your MSR-2 logbook: exclude: entities: - binary_sensor.hallway_motion_home_security_motion_detection Check Configuration in Home Assis...

If your device becomes unresponsive and you've exhausted the other troubleshooting methods you can upload a fresh set of firmware by following the below guide. The utility does need to be run from Chrome or Edge. If your device has already been connected to H...

This will cover how to put the MSR-2 into boot mode. Sometimes, this is needed to upload new firmware if the device is struggling.Boot Button Only Please look at the photo below to help access the boot button through the top of the case Use a pin to press ...

Apollo MSR-2 Review: The Smallest Presence Sensor Ever Made

Disclaimer: Currently having issues saving the zones after restarting the device when using this method. It is recommended to use the HLKRadarTool App Zone Configuration Guide.You will need to have HACS and Plotly installed to make it easier to visualize the z...

1. Download the HLKRadarTool app for either Android or Apple2. Ensure the mmWave radar you want to configure has Radar Control Bluetooth turned on. Home Assistant > Settings > Devices & services > ESPHome Devices > Select Device > Scroll down and toggle on Rad...

The Apollo MSR2 Presence Sensor is now even smaller!

Setup MSR-2 in 3 EASY Steps!

Best Air Quality Sensor? I pull apart the Apollo AIR-1… and find four great company traits....

Apollo MSR2 Radar Motion Sensor - Small just got tiny !!

This tutorial will guide you through setting up one of our MSR-2 devices (works with any mezzanine port on any Apollo Device) with the optional $4.99 GPIO Header which adds pins for you to easily add functionality to your device! In this tutorial, however, w...

This tutorial will guide you through setting up one of our MSR-2 devices (works with any mezzanine port on any Apollo Device) with the optional $4.99 GPIO Header which adds pins for you to easily add functionality to your device! In this tutorial, however, w...

This tutorial will guide you through setting up one of our MSR-2 devices (works with any mezzanine port on any Apollo Device) with the optional $4.99 GPIO Header which adds pins for you to easily add functionality to your device! In this tutorial, however, w...

This tutorial will guide you through setting up one of our MSR-2 devices (works with any mezzanine port on any Apollo Device) with the optional $4.99 GPIO Header which adds pins for you to easily add functionality to your device! In this tutorial, however, w...

Don’t Be Fooled By Its Size: Apollo MSR-2 mmWave Multisensor

NEW Apollo MTR-1: mmWare sensor: Review, Home Assistant installation, dashboard and conclusion