MSR-1

    Please refer to the general getting started article

Once added to Home Assistant you can configure different settings for your sensor. Below is what ...

    Please refer to the general Bluetooth tracking article

MSR-1 (Picture from Smart Home Scene) Light Sensor (LTR-390UV) When mounting the MSR-1 b...

How To Change The Update Frequency Of Sensors

    Please refer to the general firmware update article

If you're experiencing false triggers, we recommend using Radar Engineering Mode (REM) to monitor...

Auto-Calibration (Average, Maximum, and Intelligent)1. Download the HLKRadarTool app for either A...

Please refer to the General CO2 Calibration article

Radar Scatter Plot With Apex Charts For MSR-1 type: custom:apexcharts-card header: show: t...

This guide will walk you through using the buzzer on your MSR-1. You can also call the below se...

https://github.com/ApolloAutomation/MSR-1/tree/main/Examples  

My grandmother wanted a security system that would alert her when there was movement in her home ...

  The back of the Apollo MSR-1 has exposed GPIO for a variety of uses. From left to right: ...

Link to excel file: mmWave Presence Sensor Excel SpreadsheetScroll table to right to see others...

1. Unplug your MSR-1 from power and remove the back 2. Remove the board from the case and orie...

Open your Home Assistant config.yaml Add in this code but use your MSR-1's name logbook: ...

If your device becomes unresponsive and you've exhausted the other troubleshooting methods you ca...

This will cover how to put the MSR-1 into boot mode. Sometimes, this is needed to upload new firm...

Apollo MSR-1 Review starts at 31:22.

Smart Home Scene MSR-1 Review

Apollo MSR-1 review starts at 19:53.

BeardedTinker YouTube Video review - MSR-1

Check out the Apollo Multisensor MSR-1

The little sensor that does it all! ESPHome and Home Assistant Ready!