Setup

Getting Started

This will walk you through the process of connecting your new Apollo Multisensor (MSR-1) to Home Assistant through ESPHome. If at any point you get stuck, join our Discord for some help.

Connecting Through Hotspot

Video version: https://www.youtube.com/watch?v=Eh88bFbXpRw

To connect through the sensor's onboard hotspot follow the below:

1. Plug the sensor into a quality power brick
2. On your phone or PC, open the wifi settings and connect to "Apollo MSR-1", it might take a minute for the wifi network to show up
3. Once connected it should automatically open a dashboard for your sensor
   • If it does not automatically open the dashboard, please open your web browser and go to 192.168.4.1
4. Select the wifi network that you would like your sensor to connect to
5. Input the wifi password. After connecting, the sensor's dashboard will automatically close. You've successfully connected your sensor, please check out the "Connecting Sensor To Home Assistant" section for the next steps.