Search Results

https://www.instagram.com/apollo_automation/

If mDNS is unchecked then Home Assistant and ESPHome will not auto discover new devices. Also, if you have different networks that Home Assistant and ESPHome devices are on, then you will need mDNS on both networks and firewall rules between them. (Thank you t...

If your device becomes unresponsive and you've exhausted the other troubleshooting methods you can upload a fresh set of firmware by following the below guide. The utility does need to be run from Chrome or Edge. If your device has already been connected to H...

This will cover how to put the MSR-1 into boot mode. Sometimes, this is needed to upload new firmware if the device is struggling.Boot Button Only Plug in the device See the photo below to help access the boot button through the top of the case Use a pin ...

Link to excel file: mmWave Presence Sensor Excel SpreadsheetScroll table to right to see others Column1 Apollo MSR-1 Apollo MSR-1 CO2 Everything Presence One Kit Everything Presence Lite Kit Screek Human Sensor 1U Screek Human Senso...

    Please refer to the general getting started article

    Please refer to the general getting started article

Apple iPhone/iWatch Alternative HACS Integration: iPhone Detect https://community.home-assistant.io/t/implement-espresense-fuctionality-in-home-assistant-taking-advantage-of-ble-proxy-of-esphome/524019/6Thanks to user Jacob Pfeifer!Ok, so looks like I've got...

Please refer to the general Bluetooth tracking article

Once added to Home Assistant you can configure different settings for your sensor. Below is what each setting does. Controls RGB Light 3 RGB Neopixels. Click on the light bulb to change the color. Click on the toggle to turn on or off Calibrate SCD...

Updating Through ESPHome Addon In HomeAssistant open the ESPHome addon Or click this to Open your Home Assistant instance and show the dashboard of the ESPHome add-on. Make sure you are running the latest version of ESPHome On older hardware, it will not...

Please refer to the General CO2 Calibration article

Please refer to the general firmware update article

Please refer to the general CO2 calibration article

CO2 Charts Home Assistant Sensor graph: line type: sensor entity: sensor.apollo_air_1_a79e38_co2 detail: 2 name: Bedroom CO2 hours_to_show: 24 Custom: Plotly Graph Card type: custom:plotly-graph entities: - entity: sensor.apollo_air_1_a79e38_c...

If your device becomes unresponsive and you've exhausted the other troubleshooting methods you can upload a fresh set of firmware by following the below guide. The utility does need to be run from Chrome or Edge. If your device has already been connected to H...

This will cover how to put the AIR-1 into boot mode. This is sometimes needed for uploading new firmware if the device is struggling. Boot Button Only Plug in the device See the photo below to help access the boot button through the back of the case Use ...

MSR-1 (Picture from Smart Home Scene) Light Sensor (LTR-390UV) When mounting the MSR-1 be sure to position the device so that the two large holes are not covered This allows more light to enter and will ensure better accuracy The onboard RGB L...

1. Unplug your MSR-1 from power and remove the back 2. Remove the board from the case and orientate it like the below image. In the bottom right there is a black connector. There is a x in the lower right corner of the connector 3. Orientate the CO2 modu...

Open your Home Assistant config.yaml Add in this code but use your MSR-1's name logbook: exclude: entities: - binary_sensor.hallway_motion_home_security_motion_detection