Advanced Search
Search Results
83 total results found
MSR-1 Home Assistant Dashboard Examples
Radar Scatter Plot With Apex Charts For MSR-1 type: custom:apexcharts-card header: show: true title: MSR-1 Radar Distance show_states: true colorize_states: true apex_config: legend: position: top horizontalAlign: center offs...
Updating MSR-1 Firmware
Please refer to the general firmware update article
How To Tune mmWave Using Home Assistant
If you're experiencing false triggers, we recommend using Radar Engineering Mode (REM) to monitor the gate energy and adjust the gate threshold to eliminate them.Here is a quick introduction video of the ld2410b gates and zones. Here is a video of how to tune...
CO2 Calibration
1. Take your sensor outside (for a walk :D) and plug it in. Make sure it is connected to Home Assistant and let it sit powered on for 3-5 minutes outside before starting the calibration. 2. Navigate to your Home Assistant Dashboard and select settings 3....
Advanced Examples of Temperature & Humidity Offsets
Simple Offsets for Temperature and Humidity: Please add these to the bottom of your esphome yaml for your device then click save and install. Once you are finished, you will have two new boxes inside the home assistant esphome integration device page for your...
Apollo Automation Shop
Apollo Automation Shop
Discord
https://discord.com/invite/mMNgQPyF94
https://www.facebook.com/groups/296506776330405
https://www.reddit.com/r/ApolloAutomation/
Bluetooth Tracking with MSR-1
Please refer to the general Bluetooth tracking article
GitHub
https://github.com/ApolloAutomation
Ubiquiti Unifi mDNS Auto Discover Issue
If mDNS is unchecked then Home Assistant and ESPHome will not auto discover new devices. Also, if you have different networks that Home Assistant and ESPHome devices are on, then you will need mDNS on both networks and firewall rules between them. (Thank you t...
Manually Uploading Code Through ESPHome
If your device becomes unresponsive and you've exhausted the other troubleshooting methods you can upload a fresh set of firmware by following the below guide. The utility does need to be run from Chrome or Edge. If your device has already been connected to H...
Putting The MSR-1 In Boot Mode
This will cover how to put the MSR-1 into boot mode. Sometimes, this is needed to upload new firmware if the device is struggling.Boot Button Only Plug in the device See the photo below to help access the boot button through the top of the case Use a pin ...
mmWave Presence Sensor Comparison
Link to excel file: mmWave Presence Sensor Excel SpreadsheetScroll table to right to see others Column1 Apollo MSR-1 Apollo MSR-1 CO2 Everything Presence One Kit Everything Presence Lite Kit Screek Human Sensor 1U Screek Human Senso...
CO2 Calibration For MSR-1
Please refer to the General CO2 Calibration article
Updating AIR-1 Firmware
Please refer to the general firmware update article
CO2 Calibration For AIR-1
Please refer to the general CO2 calibration article
AIR-1 Home Assistant Dashboard Examples
CO2 Charts Home Assistant Sensor graph: line type: sensor entity: sensor.apollo_air_1_a79e38_co2 detail: 2 name: Bedroom CO2 hours_to_show: 24 Custom: Plotly Graph Card type: custom:plotly-graph entities: - entity: sensor.apollo_air_1_a79e38_c...
Manually Uploading Code Through ESPHome
If your device becomes unresponsive and you've exhausted the other troubleshooting methods you can upload a fresh set of firmware by following the below guide. The utility does need to be run from Chrome or Edge. If your device has already been connected to H...