Apollo Odroid Flashed With Home Assistant


Getting Started With Apollo Odroid Flashed With Home Assistant (Odroid M1S)

This guide will walk you through setting up your Apollo Home Assistant Hub (link)

  1. Plug your hub into the wall with the included power adapter
  2. Attach the included ethernet cable from the hub to an available ethernet port on your router
  3. From a phone or computer connected to your home's internet open your web browser and navigate to http://homeassistant.local
    1. Alternatively navigate to your router's device page, identify the odroid and type the IP + port 8123 (eg: 192.168.1.50:8123) into the browser
    2. Screenshot 2024-06-14 at 2.42.08 PM.png
  4. Screenshot 2024-06-14 at 2.44.04 PM.png
  5. Click on "Create My Smart Home" and wait for the Home Assistant installer to finish
    1. Screenshot 2024-06-14 at 2.42.41 PM.png
  6. Now you've got Home Assistant running!
  7. To get started with Apollo Devices you'll want to add ESPHome https://esphome.io/guides/getting_started_hassio.html